2016 Nissan Rogue Recalls

The riskDriver contact with a key in the collapsed position could inadvertently shut off the vehicle while driving, increasing the risk of a crash. Additionally, if the vehicle shuts off while driving, the air bags may not deploy in a crash as intended, increasing the risk of injury.

The fix — freeDealers will insert a spacer into the key slot of the jackknife key, free of charge. Interim notification letters notifying owners of the safety risk were mailed March 29, 2023. Owner notification letters are expected to be mailed August 30, 2023. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall is R22C5.

What was foundNissan North America, Inc. (Nissan) is recalling certain 2014-2020 Rogue and 2017-2022 Rogue Sport vehicles equipped with a jackknife style ignition key. The jackknife key may collapse into a folded position while driving.

The riskCorrosion in the electrical connector can result in power window/seat failure, all-wheel-drive warning light illumination, battery drainage, and electrical connector damage that increases the risk of a fire.

The fix — freeDealers will remove the harness tape and harness covering and replace both connectors and apply white lithium grease to the connectors as necessary, free of charge. Owner notification letters were mailed September 23, 2022. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's number for this recall is R21B9.

What was foundNissan North America, Inc. (Nissan) is recalling certain 2014-2016 Rogue vehicles. The electrical connector for the under dash harness may corrode due to water and salt intrusion from the driver's side foot well.

The riskIn the event of a crash, the improperly welded seat back frames may increase the risk of injury.

The fix — freeNissan will notify owners, and dealers will replace the front passenger seat back assembly, free of charge. The recall began January 08, 2018. Owners may contact Nissan customer service at 1-800-647-7261.

What was foundNissan North America, Inc. (Nissan) is recalling certain 2016 Nissan Rogue vehicles. The vehicles have front passenger seat frames that may be improperly welded. As such, these vehicles fail to meet performance requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 202a, "Head Restraints" and FMVSS 207, "Seating Systems."

The riskThe insufficient welds can increase the risk of injury to the occupants in the event of a crash.

The fix — freeNissan will notify owners, and dealers will inspect the seat frames and replace any defective lower seat frames, free of charge. The recall began December 6, 2017. Owners may contact Nissan customer service at 1-800-647-7261.

What was foundNissan North America, Inc. (Nissan) is recalling certain 2016-2017 Nissan Rogue vehicles. The recliner joints on the lower seat frame for the rear seats may have improper welds. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standards (FMVSS) number 207, "Seating Systems," and 210, "Seat Belt Assembly Anchorages."

The riskIf the front passenger seat occupant is misclassified, the air bag may deploy incorrectly in the event of a crash, increasing the risk of injury.

The fix — freeNissan will notify owners, and dealers will replace the ECU and update the OCS software free of charge. The recall began February 13, 2017. Owners may contact Nissan customer service at 1-800-647-7261.

What was foundNissan North America, Inc. (Nissan) is recalling certain model year 2013-2015 Altima vehicles manufactured January 3, 2013, to July 29, 2013, 2015-2016 Rogue vehicles manufactured October 14, 2014, to August 12, 2016, and 2016 Maxima vehicles manufactured June 4, 2015, to August 19, 2015. An incorrect Occupant Classification System (OCS) Electronic Control Unit (ECU) may have been installed in the front passenger seat. The incorrect ECU and seat combination may misclassify the front passenger seat occupant.

The riskIf the passenger frontal air bag does not deploy as intended in the event of a crash, the passenger is at an increased risk of injury.

The fix — freeNissan will notify their owners. Chevrolet City Express owners will be notified by General Motors. Dealers will reprogram the Air Bag Control Unit (ACU) and OCS Electronic Control Unit (ECU) in Altima, Maxima, Murano, Rogue, and Sentra vehicles, and replace the OCS ECU in LEAF, NV200, NV200 Taxi, Pathfinder, Infiniti Q50, JX35, and QX60 and Chevrolet City Express vehicles, free of charge. Interim notices were sent to owners on May 31, 2016. Owners will receive a second notice when remedy parts become available. Owners may contact Nissan customer service at 1-800-867-7669, Infiniti customer service at 1-888-833-3216 or Chevrolet customer service at 1-800-222-1020.

What was foundNissan North America, Inc. (Nissan) is recalling certain model year 2016-2017 Nissan Maxima, 2013-2016 Nissan Altima, NV200, LEAF, Sentra, and Pathfinder, 2014-2016 Nissan NV200 Taxi, Infiniti QX60, QX60 Hybrid, and Q50 Hybrid, 2014-2017 Nissan Rogue and Infiniti Q50, 2015-2016 Nissan Murano, Murano Hybrid, and Chevrolet City Express, 2014-2015 Nissan Pathfinder Hybrid, and 2013 Infiniti JX35 vehicles. In these vehicles, the front seat passenger Occupant Classification System (OCS) may incorrectly classify an adult passenger as a child or classify the seat as empty despite it being occupied. As a result, the passenger frontal air bag may be turned off and not deploy in the event of a crash.

The riskCorrosion of one or both of the rear lift gate support stays could cause a sudden release of pressure. If this occurs, the support stays may break off, increasing the risk of injury.

The fix — freeNissan will notify owners, and dealers will replace the rear tailgate stays, free of charge. The recall began on November 18, 2016. Owners may contact Nissan customer service at 1-800-647-7261.

What was foundNissan North America, Inc. (Nissan) is recalling certain model year 2014-2016 Nissan Rogue vehicles manufactured July 31, 2013, to January 16, 2016. In the affected vehicles, the rear lift gate support stays may corrode due to insufficient anti-corrosion treatment.