2006 BMW 3 Series Recalls

The riskAn electrical short can cause the PCV valve heater to overheat, increasing the risk of a fire while driving or, soon after driving when parked.

The fix — freeThis recall supersedes and expands previous NHTSA recalls 17V-683 and 19V-273. Dealers will install an electrical wiring harness with fuse protection for the PCV Valve heater in potentially affected vehicles, free of charge. This recall supersedes and expands previous NHTSA recalls 17V-683 and 19V-273. Vehicles previously repaired under the prior recalls will need to come back for the new recall remedy. The remedy is currently being developed. Interim owner notification letters informing owners of the safety risk were mailed on April 1, 2022. Owner notification letters were mailed on July 22, 2022. Owners may contact BMW customer service at 1-800-525-7417.

What was foundBMW of North America, LLC (BMW) is recalling certain 2008-2013 1 Series Coupe (128i); 2007-2013 3 Series Coupe (328i, 328xi, 328i xDrive); 2007-2010 X3 SAV (X3 3.0si, X3 xDrive30i); 2008-2013 1 Series Convertible (128i); 2006-2011 3 Series Sedan (325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi); 2006-2012 3 Series Wagon (328i, 328i xDrive); 2007-2013 3 Series Convertible (328i); 2006-2010 5 Series Sedan (525i, 525xi, 528i, 528xi, 530i, 530xi); 2006-2007 5 Series Wagon (530xi); 2007-2010 X5 SAV (X5 3.0si, X5 xDrive30i); 2006-2008 Z4 Coupe (Z4 3.0si); and 2006-2011 Z4 Roadster (Z4 3.0i, Z4 3.0si, Z4 sDrive30i) vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.

The riskThis condition could cause the fan motor to become inoperative, or cause the motor circuit board in the assembly to overheat, potentially leading to a fire in the engine compartment.

The fix — freeValeo will notify owners and replace the fans free of charge. The safety recall began on August 22, 2012. This recall is being conducted by Valeo, not by BMW. For further information, owners may contact Valeo at 1-888-718-2536.

What was foundThis recall involves aftermarket parts sold by Valeo. Valeo is recalling certain engine cooling fans, part numbers 696121, 696273, and 696275, used as service replacement parts for model year 2008-2011 BMW 1-Series, 2006-2011 BMW 3-Series, 2000-2009 BMW 5-Series, 2004-2005 BMW 6-Series, and 2006-2007 BMW 7-Series vehicles. A metal-oxide semiconductor may overheat due to insufficient screwing of the semiconductor on the aluminum heat sink. This primary failure could cause adjacent components on the fan assembly motor circuit board to overheat and short.

The riskIn this situation the front passenger air bags will not deploy even if a sufficiently severe accident would occur and occupant protection provided by the system would not be possible.

The fix — freeDealers will rework the front passenger seat sensor mat so that external force application to the seat does not cause a crack to the mat. The recall began on november 6, 2008. Bmw will also extend the warranty on these vehicles to 10 years from first registration without any mileage limit. Owners may contact bmw at 1-800-525-7417.

What was foundBmw is recalling 200,000 my 2006 3 series sport seat, my 2004-2006 5 series standard and sport seat, and my 2004-2006 X3 passenger vehicles. Depending on the manner and frequency of the front passenger's entry and exit, small cracks have developed in the mat. If this occurs, the front passenger air bags, with the exception of the head protection system, will be deactivated and the air bag warning lamp as well as the passenger air bag "on-off" lamp will be illuminated.

The riskThe bolted connection could break which could impair vehicle handling and control, increasing the risk of a crash.

The fix — freeDealers will inspect the bolted connection and, if necessary, adjust the connection. In some cases, it may be necessary to replace the suspension control arm and the swivel bearing. The recall began on november 21, 2006. Owners may contact bmw at 1-800-831-1117.

What was foundOn certain vehicles, one of the suspension control arm and swivel bearing connection bolts was not tightened correctly. The bolted connection could loosen.