2000 Ford F-250 Recalls

The riskDecreased lighting visibility may result in a vehicle crash.

The fix — freeDope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on july 28, 2009. Owners may contact dope, inc. At 1-626-272-1798.

What was foundDope, inc. Is recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." These lamps do not contain the required amber side reflectors.

The riskDecreased lighting visibility may result in a vehicle crash.

The fix — freeSabersport will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on may 11, 2009. Owners may contact sabersport at 1-909-598-7589.

What was foundSabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." These lamps do not contain the required amber side reflectors.

The riskIf the trailer lights are not working properly, a vehicle crash can occur.

The fix — freeAll of the defective tow packages are still at the distributor level and have not been sold to any consumers.

What was foundCertain cequent 90 degree 7-WAY right angle adaptors sold by distributors in tow packages for aftermarket sales to tow 5TH wheel rv travel trailers. Due to incorrect wiring of the harness, the trailer lights may not operate properly.

The riskOverheating could result in smoke or burn and an underhood fire.

The fix — freeDealers will install a fused wiring harness into the speed control system free of charge. The recall began on august 7, 2006. Owners may contact ford at 1-866-436-7332. (note: also see recalls 05V017 and 05V388)

What was foundOn certain trucks equipped with speed control, gasoline or natural gas engines, the speed control deactivation switch may overheat.

The riskDecreased lighting visibility may result in a vehicle crash.

The fix — freeSabry lee will notify owners and offer full credit for any noncompliant headlamp. The recall is expected to begin on june 14, 2006. Owners may contact sabry lee account executive at 1-866-467-2279.

What was foundCertain eagle eyes headlamps, p/nos. FR208-B101R, FR208-B101L, FR208-B001R, and FR208-B001L, sold for use as replacement equipment for the passenger vehicles listed above. These headlamps fail to conform to the photometric requirements of federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.

The riskWithout the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.

The fix — freeCk motorsport will notify owners and replace the noncompliant lamps free of charge. The recall began on july 1, 2006. Owners may contact ck motorsport at 1-909-610-7211.

What was foundCertain ck motorsports combination headlights, clear corner, bumper, and side marker lights sold as replacement lamps for use on the passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.

The riskLoss of visibility while driving increases the risk of a crash.

The fix — freeDealers will inspect the date code on the wiper motor. Motors built with the suspect time frame will have the wiper motor gear case cover replaced. Owner notification began august 20, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1-866-436-7332.

What was foundVehicle description: passenger cars, sport utility vehicles, and light and medium duty pickup trucks. A switch located in the plastic cover of the wiper motor gear case could malfunction and overheat, potentially resulting in loss of intermittent wiper function, loss of wiper park function, complete loss of wiper function, or ignition of the plastic cover material. Switch malfunction is most likely to occur when the intermittent setting of the wipers is being used, or when snow or ice obstructs the blades from returning to the "parked" position at the bottom of the windshield. These vehicles were built at the following assembly plants: atlanta plant from 2/11/00 through 7/31/00; chicago plant from 2/14/00 through 8/4/00; kansas city plant from 2/26/00 to 9/4/00; kentucky truck plant from 2/18/00 to 8/31/00; michigan truck plant from 2/23/00 through 8/3/00; norfolk plant from 2/21/00 through 7/27/00; wayne stamping and assembly plant from 2/25/00 through 8/15/00; and wixom plant from 2/15/00 through 8/8/00.

The riskThese vehicles do not comply with the requirements.

The fix — freeOwners will be provided a label with the required statement, along with instructions for affixing the label at the fuel filler door. Owner notification began november 2, 2000. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1-800-392-3673.

What was foundVehicle description: bi-fuel cng pickup trucks and bi-fuel cng vans, modified by cfi control systems, inc., fail to conform to the requirements of fmvss no. 303, "fuel system integrity of compressed natural gas vehicles." The label affixed to the fuel filler door by the vehicle modifier contains the inspection date and expiration date of the cng tank. However, it does not contain the statement "see instructions on the fuel container for inspection and service life."

The riskFuel leakage, in the presence of an ignition source, could result in a fire.

The fix — freeDealers will install a stop plate assembly on the vehicle frame to prevent recovery valve contact with a frame crossmember during the impact sequence.

What was foundVehicle description: pickup trucks equipped with gasoline engines and 8 foot boxes, may not fully satisfy the requirements of fmvss no. 301, "fuel system integrity." In a 30 mph frontal barrier crash test, a fuel tank vapor recovery valve separated internally. During the subsequent static rollover test, fuel spillage exceeded the specified rate.

The riskDuring the subsequent static rollover test, fuel spillage exceeded the specified rate, increasing the risk of a fire.

The fix — freeDealers will reposition the front strap isolator.

What was foundVehicle description: gasoline and diesel engine pickup trucks equipped with 8 foot beds, do not fully satisfy the requirements of fmvss no. 301, "fuel system integrity." The fuel tank front strap isolator may not be properly positioned which could result in the strap cutting the tank during a 30 mph front barrier test, resulting in fuel spillage.