2000 Chevrolet Silverado Recalls

The riskDecreased lighting visibility may result in a vehicle crash.

The fix — freeDope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on july 28, 2009. Owners may contact dope, inc. At 1-626-272-1798.

What was foundDope, inc. Is recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." These lamps do not contain the required amber side reflectors.

The riskDecreased lighting visibility may result in a vehicle crash.

The fix — freeSabersport will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on may 11, 2009. Owners may contact sabersport at 1-909-598-7589.

What was foundSabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." These lamps do not contain the required amber side reflectors.

The riskWithout the amber side reflex reflectors, the lighting visibility may be affected, possibly resulting in a vehicle crash.

The fix — freeK2 motor will notify owners and offer a full refund. The recall began on decemeber 17, 2008. Owners may contact K2 motor at 1-909-839-2992.

What was foundK2 motor is recalling 1,921 aftermarket headlamps of various models sold for use on the above listed vehicles. These headlamps are missing the amber side reflex reflector which fails to conform with the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment."

The riskWheel separation can result in a vehicle crash.

The fix — freeFederal-mogul will notify customers and will replace the hub assembly free of charge. The recall began on february 7, 2008. Owners can contact federal-mogul toll-free at 877-489-6659.

What was foundCertain federal-mogul replacement wheel hub assemblies with the brand names: national, carquest p/nos. 515020, 515021, 515025, 515053, 515054, 515059, and 515060, shipped between january 23, 2006, and december 20, 2007, sold for light duty and medium duty trucks. The inboard retention nut used to maintain hub bearing assembly can loosen resulting in an abs light indication, noise, and/or wheel separation.

The riskIf the trailer lights are not working properly, a vehicle crash can occur.

The fix — freeAll of the defective tow packages are still at the distributor level and have not been sold to any consumers.

What was foundCertain cequent 90 degree 7-WAY right angle adaptors sold by distributors in tow packages for aftermarket sales to tow 5TH wheel rv travel trailers. Due to incorrect wiring of the harness, the trailer lights may not operate properly.

The riskToo much light in certain points of the headlamp could create a distraction, possibly resulting in a vehicle crash.

The fix — freeGuide corporation will notify owners and replace the headlamps free of charge. The recall began on august 31, 2006. Owners may contact guide at 248-874-0355.

What was foundCertain guide replacement headlamps, p/nos. 16526133 and 16526134, manufactured from january 1 to july 11, 2006, sold for use on my 1999-2002 chevrolet silverado pickup trucks. The headlamp fail to comply with the photometry requirement of federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.

The riskLack of amber side reflectors in the lamps will decrease lighting visibility to other drivers and may possibly result in a vehicle crash

The fix — freeAai motorsports will notify owners and replace the lamps free of charge. The recall began on august 1, 2006. Owners may contact aai motorsports at 909-923-9188.

What was foundCertain aai motorsports combination lamps sold as replacement lamps for use on the above list passenger vehicles. Combination lamps not equipped with amber side reflectors fail to conform with the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment."

The riskDecreased lighting visibility may result in a vehicle crash.

The fix — freeMaxzone will notify owners and offer for reimbursement any noncompliant headlights. The recall began on july 10, 2006. Owners may contact maxzone at 909-822-3288.

What was foundCertain maxzone headlight assemblies, depo brand, p/nos. 332-1182L-AS and 332-1182R-AS, sold for use as aftermarket equipment for 1999-2000 chevrolet silverados. These headlamps fail to conform to the photometric requirements of federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.

The riskThe headlamps have decreased lighting visibility which could result in a vehicle crash.

The fix — freeSabry lee will notify owners and issue full credit. The recall began on may 10, 2006. Owners may contact sabry lee at 1-866-467-2279.

What was foundCertain eagle eyes replacement headlamps, model nos. GM159-B001L and GM159-B001R, sold for use on 1999-2002 chevrolet silverado model vehicles. The headlamps fail to conform to the photometric requirements of federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.

The riskWithout the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.

The fix — freePro-a motors will notify owners and offer to repurchase the lamps. The recall began on april 3, 2006. Owners may contact pro-a motors at 323-838-2988.

What was foundCertain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.

The riskIf one cable fractures, the remaining cable may retain the tailgate in a horizontal position. If both cables fracture, the tailgate would drop and strike the top surface of the rear bumper. If anyone is sitting or standing on the horizontal surface of the tailgate when both cables fractured, they could fall and be injured. On vehicles without a bumper, the tailgate may drop to a lower position.

The fix — freeDealers will replace the galvanized support cables with stainless steel support cables. In addition, dealers are to inspect the tailgate hinge and replace it, if necessary. The recall is expected to begin during april 2006. Owners may contact chevrolet at 1-800-630-2438 or gmc at 1-866-996-9463.

What was foundCertain pickup trucks have galvanized-braided-steel tailgate support cables used to support the tailgate in the full open (horizontal) position. Over time these cables can corrode and fracture when loads are applied to them.

The riskThis can cause increased stopping distances during low-speed brake applications, which could result in a crash.

The fix — freeDealers are to remove the wheel speed sensor and thoroughly clean the wheel speed sensor mounting surface on the bearing, apply rust inhibitor to the cleaned surface, grease the mounting surface, reinstall the wheel speed sensor, and check the peak-to-peak output voltage to ensure the wheel speed signal is within specifications. The recall began september 22, 2005. Owners may contact chevrolet at 1-800-630-2438 or gmc at 1-866-996-9463.

What was foundCertain pickup trucks and sport utility vehicles may experience unwanted antilock brake system (abs) activation. This condition is more likely to occur in environmentally corrosive areas. This recall will be launched in the "salt belt" states of connecticut, delaware, illinois, indiana, iowa, maryland, massachusetts, maine, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin and the district of columbia only.

The riskIf the parking brake does not hold, unintended vehicle movement could occur, which could result in a crash.

The fix — freeDealers will install a low-force spring clip retainer for vehicles equipped with a pbr parking brake system. On vehicles equipped with the trw parking brake system, dealers will install a redesigned parking brake cable assembly. The recall began on july 29, 2005. Owners may contact chevrolet at 1-800-630-2438 or gmc at 1-866-996-9463.

What was foundOn certain pickup trucks equipped with manual transmissions and built with either pbr parking brake systems or trw parking brake systems, the parking brake friction linings may wear to an extent where the parking brake can become ineffective in immobilizing a parked vehicle.

The riskAn inoperative pump can cause increased steering effort, and in hydro-boost equipped vehicles also increased braking effort, but does not completely eliminate the ability to steer or slow the vehicle.

The fix — freeDealers will replace the hydraulic pump. The campaign began on february 14, 2005. Owners may contact chevrolet at 1-800-630-2438 or gmc at 1-866-996-9463.

What was foundSome pickup trucks, vans, and sport utility vehicles equipped with a hydraulic pump driveshaft that can fracture, resulting in immediate loss of hydraulic power steering assist. On certain vehicles equipped with hydro-boost power brakes, the same condition can result in loss of power assist for braking after the reserve pressure is depleted.

The riskThe bedliner can become detached from the pickup while it is motion, possibly endangering following motorists or pedestrians.

The fix — freeDurakon will issue a press release in attempt to notify customers that could have purchased the defective bedliner. If you purchased either a durakon allstar of patriot overrail bedliner since august 1, 2003, for 1999 to 2004 chevrolet silverado or gmc sierra trucks, or purchased one of these pickup trucks with either brand bedliner already installed, you should return to an authorized durakon dealer so that the bedliner can be inspected and, if necessary, repaired with a newly designed toggle wing fastening system, or if required, replaced with a new bedliner free of charge. Please call the durakon hotline at 1-800-933-4200 to find the nearest authorized durakon dealer.

What was foundAftermarket pickup truck over-the-rail bedliners manufactured for installation on 1999-2004 chevrolet silverado and gmc sierra pickup trucks. The toggle wing assembly used to attach the bedliner to the truck bed is not engaging fully in the stake pocket of the pickup truck.

The riskAnyone sitting or standing on the horizontal surface of the tailgate when both cables fractured could be injured by falling from the tailgate. On vehicles that have had the bumper removed, the tailgate may drop even lower. Additionally, if there is cargo on the tailgate the cargo may fall off if the support cables fracture.

The fix — freeDealers will replace the cables. Interim owner notification began on april 7, 20004. The recall began on september 24, 2004, when replacement parts were available, and will continue through october 29, 2004. Owners should contact cadillac at 1-866-982-2339, chevrolet at 1-800-630-2438 or gmc at 1-866-996-9463, or visit www.mygmlink.com, and enter your vehicle identification number.

What was foundOn certain pickup trucks and sport utility vehicles, the galvanized steel tailgate support cables that retain the tailgate in the full open (horizontal) position may corrode, weaken, and eventually fracture. If both cables fractured, the tailgate would suddenly drop and strike the top surface of the rear bumper.

The riskIn a vehicle crash, front seat occupants may receive more severe injuries.

The fix — freeDealers will recalibrate the sdm on the affected vehicles. Owner notification began august 28, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact chevrolet at 1-800-222-1020 or gmc at 1-800-462-8782.

What was foundOn certain pickup and utility trucks, some of these vehicles have an air bag sensing diagnostic module (sdm) which contains an anomaly that could result in the driver and passenger's air bag failing to deploy during certain frontal crashes.

The riskDuring braking, the pedal will be lower than normal and stopping distances will be longer. If this occurs when stopping distance is limited, a crash could occur.

The fix — freeDealers will inspect the front right-hand brake pipe for wear. If there are signs of wear, this section of the brake pipe will be replaced with a new designed brake pipe section. If there are not signs of wear on the brake pipe, the dealer will install a spacer clip to ensure sufficient clearance between the brake pipe and the body cross sill.

What was foundVehicle description: light duty pickup trucks and sport utility vehicles. Some of these vehicles have a clearance condition between the front right-hand brake pipe and the body cross sill that could decrease to the point of allowing contact during the life of the vehicle. If contact occurs and the brake pipe becomes damaged, in half of the brake system there can be a loss of brake fluid and pressure. The brake warning lamp will be activated when the brake fluid level reaches the indicator limit.

The riskThis contact with the wheel rim could, in time, cause the brake hose to become worn to the point that brake fluid leakage could occur. If this occurred, loss of front brakes is possible.

The fix — freeDealers will attach a notice label to the front brake hoses stating that the calipers must be supported when removed.

What was foundThis is not a safety recall in accordance with the safety act. However, it is deemed a safety improvement campaign by the agency. Vehicle description: 1/2 ton light duty pickup trucks. On certain trucks, failure to follow the service procedure set forth in the service manual for removal of the front brake caliper can result in movement of the front brake hose relative to its knuckle mounting bracket. If this movement results in increased length between the bracket and the banjo fitting that attaches to the brake caliper, it is possible for the brake hose to come in contact with the wheel rim.

The riskThe base brakes would remain fully functional, but the dynamic rear proportioning (drp) system, which optimizes front to rear brake balance, would become inoperative.

The fix — freeDealers will replace the brake pressure module valve assembly.

What was foundVehicle description: light duty pickup trucks equipped with 4-WHEEL disc brakes. Some of these vehicles have an antilock brake system (abs) motor containing an out-of-specification spring clip. This clip could allow the motor bearing to become misaligned. If misalignment occurs, eventually the abs would be non-functional.