OBD-II Code · Powertrain
P2106
Throttle Actuator Control System - Forced Limited Power
Severity
high
Left alone, this one tends to take other parts with it.
Can you drive it
Not for long
Driving on this one risks further damage. Get it to a shop rather than carrying on with it.
Indicative cost (USD)
$300–$1,500
Varies by vehicle, diagnosis, parts, and local labor. This is not a repair quote.
PCM forced reduced power due to throttle system fault.
How a shop works this
Work from evidence to part, not the other way round. A code names a circuit or a symptom; it does not name the part that failed.
Note every code that is set, not just this one.
Codes that appear together usually narrow the cause faster than any one of them read alone.
Read the freeze frame — the conditions the fault was recorded under.
Cold or warm, idle or load, road speed and engine speed. A fault that only appears cold is a different fault from one that only appears under load, even with the same code on the scanner.
Confirm the fault is current rather than history.
Clear the code and see whether it returns under those same conditions. A code that does not come back may have been logged during a repair, a flat battery, or a bad connection that has since been disturbed.
Then work the likely-causes list in the order shown.
That order is what a shop checks first for this code — wiring and connections before the component they run to, because a connector costs nothing to inspect and is a common answer.
If the code comes back after a repair, the underlying fault is still there. That is the point to bring in a scanner with live data and freeze-frame, or a shop that has one.
Common symptoms
- Limp mode
- Reduced power lamp
- Sluggish acceleration
Likely causes
- Failed throttle bodyMost common
- Wiring/connector
- TPS/APP fault
Look up another code
P2106 — frequently asked
What does a P2106 code mean?
PCM forced reduced power due to throttle system fault.
What causes a P2106 code?
Common causes: Failed throttle body; Wiring/connector; TPS/APP fault.
What are the symptoms of a P2106 code?
Typical symptoms: Limp mode; Reduced power lamp; Sluggish acceleration.
Is it safe to drive with a P2106 code?
Not for long. Driving on this one risks further damage. Get it to a shop rather than carrying on with it. Estimated repair: $300-$1,500.
How do I diagnose a P2106 code?
Work from evidence to part, not the other way round. A code names a circuit or a symptom; it does not name the part that failed. 1. Note every code that is set, not just this one. 2. Read the freeze frame — the conditions the fault was recorded under. 3. Confirm the fault is current rather than history. 4. Then work the likely-causes list in the order shown.
More free tools