Skip to content
Skip to content

OBD-II Code · Emissions

P0412

Secondary Air Injection Switching Valve

Severity

low

Lowest on our scale. Fix it when convenient.

Can you drive it

Only if running normally

A short trip to a shop may be reasonable if the light is steady and the car runs normally. Stop safely for a flashing light, severe shaking, overheating, loss of power, or another urgent warning. The code alone cannot confirm safety.

Indicative cost (USD)

$150–$500

Varies by vehicle, diagnosis, parts, and local labor. This is not a repair quote.

Air injection switching valve fault.

How a shop works this

Work from evidence to part, not the other way round. A code names a circuit or a symptom; it does not name the part that failed.

  1. Note every code that is set, not just this one.

    Codes that appear together usually narrow the cause faster than any one of them read alone.

  2. Read the freeze frame — the conditions the fault was recorded under.

    Cold or warm, idle or load, road speed and engine speed. A fault that only appears cold is a different fault from one that only appears under load, even with the same code on the scanner.

  3. Confirm the fault is current rather than history.

    Clear the code and see whether it returns under those same conditions. A code that does not come back may have been logged during a repair, a flat battery, or a bad connection that has since been disturbed.

  4. Then work the likely-causes list in the order shown.

    That order is what a shop checks first for this code — wiring and connections before the component they run to, because a connector costs nothing to inspect and is a common answer.

If the code comes back after a repair, the underlying fault is still there. That is the point to bring in a scanner with live data and freeze-frame, or a shop that has one.

Common symptoms

  • Check engine light

Likely causes

  • Stuck switching valveMost common
  • Wiring

Look up another code

P0412 — frequently asked

What does a P0412 code mean?

Air injection switching valve fault.

What causes a P0412 code?

Common causes: Stuck switching valve; Wiring.

What are the symptoms of a P0412 code?

Typical symptoms: Check engine light.

Is it safe to drive with a P0412 code?

Only if running normally. A short trip to a shop may be reasonable if the light is steady and the car runs normally. Stop safely for a flashing light, severe shaking, overheating, loss of power, or another urgent warning. The code alone cannot confirm safety. Estimated repair: $150-$500.

How do I diagnose a P0412 code?

Work from evidence to part, not the other way round. A code names a circuit or a symptom; it does not name the part that failed. 1. Note every code that is set, not just this one. 2. Read the freeze frame — the conditions the fault was recorded under. 3. Confirm the fault is current rather than history. 4. Then work the likely-causes list in the order shown.

More free tools

See all 9 tools