OBD-II Code · Body
B2600
Remote Keyless Entry Antenna Circuit
Severity
low
Lowest on our scale. Fix it when convenient.
Can you drive it
Only if running normally
A short trip to a shop may be reasonable if the light is steady and the car runs normally. Stop safely for a flashing light, severe shaking, overheating, loss of power, or another urgent warning. The code alone cannot confirm safety.
Indicative cost (USD)
$100–$400
Varies by vehicle, diagnosis, parts, and local labor. This is not a repair quote.
Keyless entry antenna fault.
How a shop works this
Work from evidence to part, not the other way round. A code names a circuit or a symptom; it does not name the part that failed.
Note every code that is set, not just this one.
Codes that appear together usually narrow the cause faster than any one of them read alone.
Read the freeze frame — the conditions the fault was recorded under.
Cold or warm, idle or load, road speed and engine speed. A fault that only appears cold is a different fault from one that only appears under load, even with the same code on the scanner.
Confirm the fault is current rather than history.
Clear the code and see whether it returns under those same conditions. A code that does not come back may have been logged during a repair, a flat battery, or a bad connection that has since been disturbed.
Then work the likely-causes list in the order shown.
That order is what a shop checks first for this code — wiring and connections before the component they run to, because a connector costs nothing to inspect and is a common answer.
If the code comes back after a repair, the underlying fault is still there. That is the point to bring in a scanner with live data and freeze-frame, or a shop that has one.
Common symptoms
- Key fob unreliable
Likely causes
- Failed antennaMost common
- Wiring
Look up another code
B2600 — frequently asked
What does a B2600 code mean?
Keyless entry antenna fault.
What causes a B2600 code?
Common causes: Failed antenna; Wiring.
What are the symptoms of a B2600 code?
Typical symptoms: Key fob unreliable.
Is it safe to drive with a B2600 code?
Only if running normally. A short trip to a shop may be reasonable if the light is steady and the car runs normally. Stop safely for a flashing light, severe shaking, overheating, loss of power, or another urgent warning. The code alone cannot confirm safety. Estimated repair: $100-$400.
How do I diagnose a B2600 code?
Work from evidence to part, not the other way round. A code names a circuit or a symptom; it does not name the part that failed. 1. Note every code that is set, not just this one. 2. Read the freeze frame — the conditions the fault was recorded under. 3. Confirm the fault is current rather than history. 4. Then work the likely-causes list in the order shown.
More free tools